Raspberry Pi wireless connection
If you are booting your raspberry pi first time and connecting to the boards console through a USB to TTL serial cable , you can configure the wireless interface of your board to connect it to your home wireless router which has a WPA wireless security mode enabled. $sudo vi /etc/network/interfaces #Then edit the file as below. auto lo iface lo inet loopback iface eth0 inet dhcp auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-scan-ssid 1 wpa-ap-scan 1 wpa-key-mgmt WPA-PSK wpa-proto RSN WPA wpa-pairwise CCMP TKIP wpa-group CCMP TKIP wpa-ssid "<YOUR WIRELESS NETWORK SSID>" wpa-psk "<YOUR WIRELESS NETWORK PASSWORD>" iface default inet dhcp $sudo /etc/init.d/networking restart After a few seconds your wireless interface will get an IP address from your home network's DHCP server. You can see the IP address with the...